Polyethylene Geomembranes

Polyethylene(PE) takes the name of ethylene which is in the form of monomer. With several methods of polymerization, Ethylene becomes Polyethylene. Ahed HDPE Geomembrane is a geosynthetic liner which is formed as a result of extrusion of high density polyethylene and shaped homogenously by calender system. It can be used in all projects where impermeability is required.

HDPE GEOMEMBRAN

Product Featurus
• High resistance to chemicals
• UV resistant
• Less friction rate because of the textured layer
• Highly resistant to organic and inorganic solvents
• Profoundly resistant to the fractures
• Resistant against natural conditions
• Resistant to punctures and cracks
• Low permeability
• Higher tensile strenght
Use Locations:
• Landfills
• Waste water repository and treatment
• Drainage pits for collecting leakage of gold
and other mines
• Oil tanks and oil fields
• Sedimentation ponds
• Fertilizer pits
• Building foundations, if needed
• Irrigation ponds
• Tunnels
• Irrigation canals
• Bioenergy generation plants
Types:
• HDPE Flat Geomembranes
• HDPE one-side textured geomembranes
• HDPE two-side textured geomembranes
• LDPE geomembranes
• LLDPE geomembranes
• VLDPE geomembranes
• HDPE T-Grip geomembranes
• HDPE Discrete T-Grip geomembranes
• HDPE one-side geotextile laminated geomembrane
/ Types and Sizes
It is a kind of geomembrane made of high density polyethylene raw material and generally used in landfills;
chemical repository sites. Although it is hard, it is not fractured. It is manufactured in a width of 2,10m
to 7,00mt; standart lengths of 50m to 100m or optional lengths; in optional colours; with thicknesses of
1,00mm&1,20mm&1,50mm& 2,00mm&2,50mm&3,00mm.

 

AHED / LDPE:

It is a kind of geomembrane made of low density polyethylene raw material and generally used in landfills;
waste water repository sites and irrigation ponds. It has a softer form than HDPE geomembranes. It is
manufactured in a width of 2,10m to 7,00mt; standart lengths of 50m to 100m or optional lengths; in
optional colours; with thicknesses of 1,00mm&1,20mm&1,50mm& 2,00mm&2,50mm&3,00mm.

AHED / LLDPE:
It is a kind of geomembrane made of linear low density polyethylene raw material and generally used in
ornamental ponds and irrigation canals. It has the softest form in types of polyethylene geomembrane. It
is manufactured in a width of 2,10m to 7,00mt; standart lengths of 50m to 100m or optional lengths; in
optional colours; with thicknesses of 1,00mm&1,20mm&1,50mm& 2,00mm&2,50mm&3,00mm.

AHED / VLDPE:
It is a kind of geomembrane made of the lowest density polyethylene raw material and generally
used in ponds and water reservoirs. It is manufactured in optional colours and with thicknesses of
1,00mm&1,20mm&1,50mm& 2,00mm&2,50mm&3,00mm.